Click to copy number
Get a moving quote
Get a quote
- Home
- Mobile Home Movers
- Cost Guides
- Moving Resources
- Our Services
- FAQs
- Company
- I'm a mover
- Partners
- Others
Click to copy number
Researched from public sources, last checked March 14, 2026. Not yet verified by our team: confirm with the agency before relying on it.
North Carolina has no license specific to mobile-home movers.
Last verified July 2026
A manufactured home moving through North Carolina travels under an NCDOT Mobile/Modular Home permit, governed by NCDOT Publication MH-2 — a single-trip permit for a one-off move, or an annual permit for regular routes. It's issued by the NCDOT Oversize/Overweight Permit Unit.
Source: NCDOT · Oversize/Overweight Permit Unit
North Carolina requires a permit for any load wider than 8 feet 6 inches, with warning flags required above that width. Manufactured-home permits are tiered by the home's box width — 12, 14, or 16 feet — which also drives the escort requirements.
Source: NCDOT MH-2
North Carolina sets escort rules for manufactured homes through its dedicated MH-2 manual, separate from the general oversize-load rules. A home 12 or 14 feet wide needs no escort unless the permit specifies one. A 16-foot-wide home requires two escorts on all highways, and the issuing agent can add more depending on the route, pavement width, or height. A home taller than 14 feet 5 inches also needs a front pole-car escort. Homes are capped at 16 feet wide, and 16-foot moves run Monday through Saturday between 9:00 a.m. and 2:30 p.m.
Source: NCDOT MH-2 · 19A NCAC 02D
Most of North Carolina is HUD Wind Zone I. Two coastal counties — Brunswick and Carteret — are Wind Zone II, where homes must meet stronger coastal wind standards. Homes must comply with the state building code's wind-zone requirement. There's no state seismic rule.
Source: HUD/FEMA wind-zone map · NC building code
A manufactured home in North Carolina is set up under the State of NC Regulations for Manufactured Homes, overseen by the NC Office of the State Fire Marshal. Set-up contractors are licensed by the NC Manufactured Housing Board, and a set-up permit is required. The home also needs its HUD certification label.
Source: NC Office of State Fire Marshal · Manufactured Housing Board
In North Carolina, a manufactured home can't be sold without a HUD label — but there's a carve-out for homes titled before, or built before, June 15, 1976. Utilities also can't be connected to a home that doesn't meet the compliance rules, so an older home's status matters for both sale and hookup.
Source: N.C.G.S. §143-149 / §143-150
The transport permit belongs to the mover. The MH-2 permit carries the transporter's name and address, and an annual permit may be co-issued to a licensed dealer alongside the transporter.
Source: NCDOT MH-2
"Set-up and installation are handled by a licensed manufactured-home set-up contractor, registered with the NC Manufactured Housing Board. The local building official issues the set-up permit. Transport and installation are separate licensed roles — the mover brings the home, and the set-up contractor installs and certifies it.
Source: NC Manufactured Housing Board · N.C.G.S. §143-143.11
43 companies in our records hold a North Carolina credential for mobile home work. Browse mobile home movers in North Carolina.